• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Type: Other Flooring
  • Place of Origin: Izmir, Turkey
  • Brand Name: ISONEM
  • Model Number: BE 90

Packaging & Delivery

Packaging Details PACKAGING : In buckets containing 18 kg.
Delivery Time Shipped in 3 days after payment
Product Description

 

ISONEM BE 90 is an elastomeric acrylic polymer based waterproofing product with the consistency of paint, that forms an uniform and waterproof layer on the surface when applied. Water based, does not contain solvents. Easily applicable on dry or moist clean surfaces. It is not effected from UV radiation due to the special polymers found in its ingredients. Avoids the formation of extreme heating by reflecting 80% of the sun rays. Shows a high resistance against adhesion, it does not permit the deposit of soil on the surface and maintains its original form and color for many years. It is inflammable and is not consistent with tar or bitumen. The use of ISONEM BE 89 liquid rubber is recommendable in the insulation of this type of floor. ISONEM BE 90, is white and can be colored upon request. It has elasticity of 250%.

Areas of Use :

  • On old and new roofs and streams
  • On roofs and grooves coated with sheet iron, galvanize and zinc
  • On the seams of chimneys and on the seams of walls
  • On joints of walls and parapets.

Method of Use :
The surfaces that will be insulated must be clean, dry or slightly wet. Substances like oil, mud, rust or grease must be cleansed from the surface if they exist, it is not usable on surfaces that emit salt or that allow water flow on the negative side, in cases when there exists cracks or repairs on the surfaces, the necessary process should be applied before insulation, with ISONEM 03 elastic mortar. Particularly on floors that have wide openings and where heat insulation systems are installed, in other words, on moving floors that are exposed to the formation of cracks, the use of 75 gr. plaster filter reinforcement is recommended. In case of dilatation on the areas to be insulated, dilatation process should be applied with the use of A4 Elastic filling, and insulation process should be applied subsequently. ISONEM BE90 is ready to use. The only required action is to mix the substance in a homogenous manner after the opening of the lid.

 


Under coating layer :
All surfaces where the application will be made, must be coated with a lining through the application of ISONEM BE 90 diluted with water at a proportion of 1:10 The lining should be applied with the use of a hard brush. After the lining is applied, it should be left for drying for 4 hours.

 


Insulation Application :
ISONEM BE 90 is applied on the surface coated with primer in two layers without thinning, with an interval of 4 hours in between. The insulation process that is applied, must be protected against rain and water for 4 hours. Insulation application should not be done in temperatures below + 5 C and on wet or frozen floors. Especially in the insulation process applied on flat roofs, it should be checked whether or not an accurate and adequate slope is permitted. During the process, it must be ensured that sufficient quantity of expendable water is available, and that any deposit of water is avoided on the roof or terrace.

CONSUMPTION : 1 kg/m2 (primer + 2 layers)


STORAGE : In a dry and cool place, for 12 months.

 

 

Company Information

5 CONTINENTS, IN NEARLY 100 COUNTRIES,

ISONEM CONSTRUCTION CHEMICALS was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (r & d) team, each of which is specialized in his/her branch at a 1500 m2 closed modern production site landed on an area of 2500 m2 within ITOP Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sonic, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.

We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a  principle within every stage by using high technology since the beginnings of our organization.

We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.

Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.

As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.

  

 

 

Technology

 

PRODUCTION SITE

 

Certifications

 

Trade Shows

 

Contact

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Turkey
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $
Learn More