• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Type: Waterproof Membrane
  • Place of Origin: Izmir, Turkey
  • Brand Name: ISONEM
  • Model Number: MS POLYMER
  • Color: Clear and all colors available

Packaging & Delivery

Packaging Details 5 kg, 10 kg, 18 kg plastic pails.
Delivery Time Shipped in 3 days after payment
Product Description

ISONEM MS POLYMER - WATERPROOFING COATING

ISONEM MS POLYMER is a one part, solvent-free, pure acrylic- based special waterproofing polymer produced by the latest technology. It is ready to use, UV resistant, bright, hard elastic and walkable. It is not affected by pedestrian and vehicle traffic and chemicals. It is used as an insulation material on terraces, roofs, balconies and wet rooms, industrial floors, concrete, alum, plaster, wood surfaces, spray polyurethane- applied surfaces, sidings and foundation walls; and also used as a coloured coating on factory, depot, parking lot and walkway, asphalt road. As it dries too fast, it is easy to work and quick. Very economical due to its low consumption. Applicable to any surfaces. 

 

Uses

  • Insulations of roof terrace and balconies
  • Insulations of wet room and foundation walls
  • Floors of factory and depot
  • Park and walk ways
  • Water lakes, terraces and roofs
  • In all kinds of poor subsoils
  • In exteriors
  • In metal roofs, woods
  • On bituminous problematic insulations
  • On asphalt and concrete surfaces

 

Easily applied as a waterproofing agent for roofs and balconies, canals,chimney surroundings, gutters and strainers in wide area and detailed, flat or inclined roofs.

 

Characteristics /Advantages

  • Ready to use
  • Low labour cost
  • Remains flexible at low temperatures
  • Permits water vapour to the surface
  • Can be thinned with water, solvent-free
  • Can be painted with acrylic based paints
  • Can be coloured with water based pasty pigments
  • UV resistant
  • Not affected by pedestrian and vehicle traffic
  • Does not require protective alum or concrete
  • Applied easily on wet and moist surfaces in all weather conditions, summer- winter
  • Non- flammable

 

TECHNICAL PROPERTIES

Form: Appearance / Colour; Liquid / clear, white,or in any colour.

Chemical Base: Acrylic based liquid

Density: 1.06+0.05 kg/dm3, + 20 0C

pH: 6 - 9

Solids Content % 52+3, 105 0C

Elongation at Break Min. % 250 (for 1 mm thickness, at +20 0C, after 72 hrs)

Application Temperature: +5 °C -  +35 °C

Interval between each application: approx. 4 hours

 

APPLICATION PROCEDURE

Substrate Quality / Preparation

- Substrate must be clean, uniform, dry, free of dust, oil or grease and loose or weak particles

- Plastered and concrete surfaces should be cleaned with 1:10 ISONEM UNI-CLEAN : water solution. Rinse the surface with clean water afterwards

- Surface defects and voids should be repaired with ISONEM M 03 repair mortar

- Steel surfaces should be painted with suitable anti-corrosion material before application.

 

ISONEM MS POLYMER, diluted to 200%, should be used as a primer on surfaces like eternit, foamed blocks, brick, tile, masonry, concrete and plaster.

 

Application Conditions / Limitations

Substrate Temperature min. +5°C, max. +35°C

Ambient Temperature min. +5°C, max. +35°C

 

Application Instructions

Application Method / Tools

Application can be done by brush, roller, or spray gun. First layer should be applied in one direction only and following layer to be perpendicular to the previous one.

 

Waiting Time /Overcoating

Waiting time depends on the ambient temperature, substrate temperature, relative humidity and the thickness of coating applied. Before applying the second layer, make sure that the first layer is totally cured and dry. Wait 4 hours (at 23°C and %50 relative humidity).

 

Notes on Application /Limitations

- This product is not generally suitable on its own for waterproofing against hydrostatic pressure.

- It is recommended to reinforce the vertical and horizontal joints of excessively cracked surfaces by using geotextile protection layer.

- Freshly applied material should be protected from rain and/or frost for 24 hours.

- ISONEM MS POLYMER should not be applied during rain, fog and temperatures below +5°C.

 

Curing Details

ISONEM MS POLYMER is applied at 23°C:

- Achieves its mechanical strength after three days

- Becomes fully waterproof after almost five days

- Reaches its final strength values after seven days

- At low temperatures, above mentioned durations can be longer

All the afore-mentioned times refer to +23 oC and 50% relative humidity. Higher temperatures and lower humidity rates quicken, whereas lower temperatures and higher humidity rates slow down the drying process.

 

CONSUMPTION: for transparent applications on ceramic, tile etc surfaces approx. 150 gr/m2, on concrete, alum and plaster surfaces approx. 500 gr/m2

 

Packaging: 5 kg, 10 kg, 18 kg plastic pails

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Technology

 

PRODUCTION SITE

 

Our Services

USAGE AREAS OF ISONEM PRODUCTS

OUR PRODUCT RANGE COVERS;

-WATERPROOFING MATERIALS

-FLOOR COATINGS

-SPECIAL PAINTS & COATINGS

-INDUSTRIAL CHEMICALS

 

Certifications

 

 

 

Trade Shows

 

 

Contact

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Turkey
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $
Learn More