It provides decorative and aesthetic flooring appearance. It allows to obtain a broader view with 3D images in confined spaces. Exceptional designs can be achieved by different visual designs on the floors. It is solvent-free, epoxy-based, transparent, two-component, protective finishing coat. It is resistant to scratches, impact, water and chemicals.
• Wet surfaces such as kitchen, bathroom and lavatory, • Stores and showrooms, • Shopping malls, • Halls and corridors,
• Schools and kindergartens • Hotels and museums, • Sport halls, • Offices, • Restaurants and cafes.
Surface Preparation: 3D FLOOR application surface, prior to application, should be leveled so as to obtain a smooth and flat appearance. Weak
particles and impurities that may have adverse effects on the adhesion should be removed from the surface. If there is any water leakage which
will adversely affect the application, without eliminating problems the application should not be initiated.
ISONEM 3D FLOOR ®
3D Image Laying: The selected 3D image is laid on a floor whose surface smoothness is achieved, so that there will be no air bubbles on the surface.
Preparation of the mixture: ISONEM 3D FLOOR is supplied as ready to use kits according to the mixing ratio. Paying attention to the pot life, a required mixture- amount of application should be prepared. Before starting the mixture it must be ensured that the material temperatures are between +15 and + 25 ° C. The component A should be thoroughly mixed with a mechanical mixer at 300 - 400 rpm for 3 - 4 minutes, without dragging air inside. Then, the complete contents of the component B should be poured into the component A and it should be ensured that there are no contents of the component B remained. A + B should be mixed for at least 3 minutes until a homogeneous mixture is obtained and the prepared mixture should be consumed within 40-50 minutes.
Application: Pouring the transparent mixture prepared homogeneously over the image, spreading is provided by a brush, roller or a suitable apparatus.
Note: After application, the protective coat applied over the image should be protected from all kinds of external influences for 24 hours in order to get a smooth appearance.
CONSUMPTION: Approx. 0.3 - 0.4 kg / m2, although it is variable depending on the application conditions.
PACKAGING: 5 kg set (Component A: 3.1 kg metal container, Component B: 1.9 kg metal container)
STORAGE CONDITIONS/SHELF LIFE: 12 months from date of production if stored properly in unopened and undamaged original sealed containers
at temperatures between +5 °C to +35 °C at dry conditions. Protect from excessive temperature and frost.
Application Ground Temperature: +10 to + 30 ° C degrees
Pot life: 40 - 50 minutes (20 ° C)
Dry-to-touch Time: 8 -10 hours
Recoating Time: 18 - 48 hours
Packaging & Shipping
Packaging Details:5 kg set
Delivery Detail:3-5 DAYS
We will provide professional and efficient service,any questions about product service, please contact us directly,we will reply you within 24 hours.
5 CONTINENTS, IN NEARLY 100 COUNTRIES,
ISONEM CONSTRUCTION CHEMICALS was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (r & d) team, each of which is specialized in his/her branch at a 1500 m2 closed modern production site landed on an area of 2500 m2 within ITOP Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sonic, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.
We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a principle within every stage by using high technology since the beginnings of our organization.
We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.
Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.
As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.
USAGE AREAS OF ISONEM PRODUCTS
OUR PRODUCT RANGE COVERS;
-SPECIAL PAINTS & COATINGS
Transaction History of the Supplier
Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.